Product Overview
Product Overview
Allen-Bradley 150-C19NBR is a Industrial Component used in industrial automation systems. It belongs to the SMC-3 family.
Product Highlights
- Product Line: SMC-3
Application & Compatibility
The Allen-Bradley 150-C19NBR is a 24 Volt AC/DC SMC-3 smart motor controller; it is a 3-phase and 3-wire type with an open-type enclosure. Its ampere rating is 19 A, with the current ranging from 6.3 to 19 A and it has an input line voltage of 200 to 480 Volts AC at 50 to 60 Hertz. Its Hp at 350% starting duty is 1.5 to 5 at 200 Volts AC, 2 to 5 at 230 Volts AC, and 5 to 10 at 460 Volts AC, while at 450% it ranges from 1.5 to 3 at 200 Volts AC, 2 to 3 at 230 Volts AC, and 5 to 10 at 460 Volts AC. Note that this controller has Delta compatibility and you can stack controllers together to make a modular control system (MCS). An LED status indicator is available on this controller and this shows RUN, OFF, and fault conditions. The type of fault is indicated via the number of flashes made by the LED indicator. It also has a reset button that doubles as the hold-to-test button for quick diagnosis of the controller. The DIP switches allow faster setup of the START/STOP mode and other configurations. The rotary switch is used for setting up the motor FLA of the controller.
Always verify the exact part number, electrical ratings, control options, and installed system compatibility before installation.
Condition
This item is new surplus inventory and has never been installed in an industrial environment. Original manufacturer packaging may not be available. The unit may show minor shelf wear from storage or handling. Backed by a 2-Year warranty, this component is ready for industrial use, spare inventory, system expansion, and replacement applications.
